Pro Control V-Spec Hydraulic Pedals - 3 Pedal System

Pro Controls V-Spec Hydraulic pedals are commercial grade professional pedals with full hydraulic operation of all three pedals for the ultimate pedal feel.

Maximum brake force is 136kg (300lbs)

Maximum clutch force is 45kg (100lbs). 

Fully adjustable pedal geometry and pedal force. Adjustable hydraulic damping on every individual pedal. 

Load cells measure throttle and clutch position and brake pressure providing true linear output in relation to your pedal input. Load cells do not wear over time.

Travel is adjustable from 10° to 20° on the throttle and from 14° to 24° on the clutch.

Each pedal features a fully adjustable adjustable hydraulic damper. The brake and the clutch both feature a 2-way damper. This damper adds resistance depending on how fast the pedal is pressed or released. The throttle pedal features a damper which resists speed at the ingoing stroke. This helps with smoothing the throttle application.

The dual stage brake system consists of an initial coil spring, simulating the pad to disc gap and progressive rubber springs. The pedal firmness is adjusted by selecting from 10 different rubber stack heights. With 136kg or 300lbs max force, this pedal easily requires 36x more effort than regular consumer grade brake pedals. Braking using muscle memory improves accuracy and consistency.

The clutch features a regressive spring mechanism allowing you to greatly adjust the effort, travel and feel. The maximum pedal effort of 45kg or 100lbs is again far greater than that of regular consumer grade pedals, but lighter settings are easily selected.